toshiba toshiba corporation 1/3 led lamp TLOE156P the information contained here is subject to change without notice. the information contained herein is presented only as guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba or othe rs. these toshiba products are intended for usage in general electronic equip- ments (of?e equipment, communication equipment, measuring equipment, domestic electri?ation, etc.) please make sure that you consult with us before you use these toshiba products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traf? signal, combustion control, all types of safety devices, etc.). toshiba cannot accept liability to any damage which may occur in case these toshiba products were used in the mentio ned equipments without prior consultation with toshiba. ingaalp orange light emission panel circuit indicator 5 mm diameter (t1-3/4) new emission material (ingaalp) orange led peak wavelength: l p = 612 nm all plastic mold type colorless clear lens low drive current, high intensity orange light emission - recommended forward current: i f = 15 ~ 20 ma (dc) all plastic molded lens - provides an excellent on-off contrast ratio fast response time - capable of pulse operation high power luminous intensity - suitable for outdoor message signboard - automotive use straight lead (no stand-off) high reliability -t stg : -40 ~ 120 c maximum ratings (t a = 25 c) characteristic symbol rating unit forward current (dc) i f 30 ma reverse voltage v r 4v power dissipation p d 75 ma operating temperature range t opr - 30 ~ 85 c storage temperature range t stg - 40 ~ 120 c
2 / 3 t toshiba corporation TLOE156P electr o-optical characteristics (t a = 25 c) (no te) rank selection carr ied out under ne xt standard r ange respectiv ely , although it needs 15% additional f or guar anteed limits . q:320-640mcd, r:560-1120mcd, s:1000-2000mcd. precaution please be careful of the f ollo wing: 1. solder ing temper ature: 260 c max. solder ing time: 3 sec max. (solder ing por tion of lead: up to 2 mm from the body of the de vice). 2. if the lead is f or med, the lead should be f or med up to 5 mm from the body of the de vice without f or ming stress . sol- der ing shall be perf or med after lead f or ming. characteristic symbol t est condition min. t yp. max. unit f orw ard v oltage v f i f = 20 ma 1.95 2.4 v re v erse current i r v r = 4 v 50 m a luminous intensity i v i f = 20 ma (no te) (272) mcd p eak emission w a v elength l p i f = 20 ma 612 nm spectr al line half width dl i f = 20 ma 15 nm
toshiba corporation 3 / 3 TLOE156P
|
